Easy Guide to Jump Starting a Dead Car Battery

A car battery can die for a number of reasons. The most common cause is simple – age. Batteries have a natural lifespan, and after a few years they just stop being able to hold a charge. Other causes of battery death include extreme temperatures, loose or corroded connections, and electrical issues within the car itself.

Continue below to learn more about car battery care, including how to jump start a dead car battery using a set of jumper cables and a good Samaritan.

Sell Junk Car Parts Louisville Kentucky 502-804-5605
Sell Junk Car Parts Louisville Kentucky 502-804-5605

Car Battery Maintenance

Despite what some people may think, it’s actually quite easy to prevent a battery from dying prematurely. The most important thing to do is to keep it clean. Dirty batteries are more likely to corrode, and corrosion can lead to all sorts of problems. If you live in an area with cold winters, make sure to keep your battery warm – either by storing it in a garage or by using a battery blanket. And finally, if you suspect that your car has any electrical issues, get them fixed as soon as possible. Ignoring these issues will only make them worse, and they could eventually lead to your battery dying.

It’s important to maintain your car battery to extend its lifespan and keep it working properly. Here are a few tips on how to do so:

▶ Keep it clean – free of dirt, corrosion, and other debris.

▶ Check the water level regularly and top it off with distilled water if necessary.

▶ Inspect the terminals and connections to make sure they’re tight and free of corrosion.

▶ Have the battery tested regularly to check its performance and identify any potential issues.

▶ If your battery is more than 3 years old, consider replacing it.

Following these tips will help you keep your car battery in good condition and prevent any problems down the road.

How to Jump Start a Dead Battery

A car battery can die suddenly and without warning. If you’re lucky, it will happen when you’re at home or work and you can call a friend or tow truck to help. But if it happens when you’re out and about, you’ll need to know how to jump start your car battery. It’s actually not that difficult, but it’s important to follow the instructions carefully to avoid damaging your car.

Here’s What You’ll Need:

■ Jumper cables
■ Another car with a working battery
■ A set of instructions

Here’s How To Do It:

1. Park the working car next to the car with the dead battery, making sure that the two batteries are not touching.

2. Turn off all lights and accessories in both cars.

3. Connect one end of the positive (red) jumper cable to the positive terminal of the dead battery.

4. Connect the other end of the positive jumper cable to the positive terminal of the working battery.

5. Connect one end of the negative (black) jumper cable to the negative terminal of the working battery.

6. Connect the other end of the negative jumper cable to a metal part of the car with the dead battery. This helps to ground the circuit and prevents sparks.

7. Start the working car and let it run for a few minutes.

8. Try to start the car with the dead battery. If it doesn’t start, check the cables to make sure they’re all connected properly and try again.

9. Once the car with the dead battery is running, disconnect the jumper cables in the reverse order that you connected them.

Congratulations! Your battery should be charged up again!

Did your car battery die for good this time? If so, sell it for cash on the spot, then place that profit towards a new car battery! Contact GC’s Junk Cars at 502-804-5605 to sell a junk car parts in Louisville, Kentucky for an instant cash payout. We provide FREE junk car removal!

Related Posts:

Did My Car Battery Die Prematurely?
Why Did My Car Battery Corrode?
How to Safely Toss Out an Old Car Battery

Why Did My Car Battery Corrode?

As someone who’s been driving for many years, you’ve come to learn quite well the importance of your car battery. Car batteries work ongoing maintenance and routine replacement. Without proper care, car batteries will decline in both efficiency and performance. If you’ve been having problems starting or maintaining charge in your car battery, you might want to pop open the hood and take a look at its current condition. If you notice a white, scum like film accumulating around and within the battery terminals, it is an indication of battery corrosion.

Continue reading to learn more about battery corrosion, including what causes it to happen and what you can do about it.

Auto Parts Recycling Louisville Kentucky 502-804-5605
Auto Parts Recycling Louisville Kentucky 502-804-5605

Identifying Car Battery Corrosion

Car battery corrosion is common, especially in old car batteries. It is easy to diagnose a corroded car battery because the bright crust that forms on and around the battery terminals is hard to miss. It looks similar to dried-up toothpaste, ranging in colors from white to greenish or light blue hues. It starts white, but once, but upon exposure to moisture, it will turn to a greenish or blue color. Furthermore, corrosion crust accumulates in large masses, so once it is discovered, there is usually a large deposit to deal with.

What Causes a Car Battery to Corrode?

When a car battery is corroded, the crust impedes the electrical connection because it is a bad conductor of electricity. It causes a transient current flow, which means the electricity circles right back to the battery just keep the battery charged. Your car might turn on, but the engine will not be able to start.

The most common causes for car battery corrosion development include overcharging, gas escape, and old age. If your car battery is overcharged, the fluid within the battery terminals will expand. This will cause an overflow of liquid inside of the car battery, which can basically flood the terminals with acid. Acid causes corrosion, which in turn generates corrosion development.

Gas escape is another common reason why car batteries develop corrosion. This usually depends on the type of car battery and how it’s placed within the vehicle. Car batteries have tiny vents that allow hydrogen gas to flow through them. Sometimes these hydrogen gases can come in contact with the battery terminals or car cables, thus triggering corrosion. As already mentioned, old car batteries are more prone to car battery corrosion.

What To Do About Battery Corrosion

If your car battery is corroded, you must take a closer look to determine your compatible options. You see, just because a car battery is corroded does not mean that it is junked. It is possible to clean the corrosion off of a car battery, so long as you have the right materials and use the right methods. If your battery is new, you should try cleaning the corrosion before replacing the battery altogether. If your battery is old, or approaching the 4 to 5 year mark, battery replacement is the best option for you. Sell your used car battery to a Louisville scrapyard for cash on the spot!

To clean the corrosion off of a car battery, you will need baking soda, petroleum jelly, anti-corrosion pads, a stiff bristle brush or wire brush, safety goggles, work gloves, clean water, and rags. Always disconnect your battery cables starting with the negative (-) cable first before you begin cleaning your car battery. Combine the baking soda, usually around a teaspoon, with the petroleum jelly to create a paste. Apply the paste all over the corrosion and scrub away with your anti-corrosion pads or stiff bristle brush. Thoroughly rinse the car battery when you are finished, then allow it to dry completely.

Do you have some junk auto parts that you’d like to sell for cash on the spot? Contact GC’s Junk Cars at 502-804-5605 to sell used car parts in Louisville, Kentucky. We pay cash for all scrap metal and automotive parts.

Related Posts:

How to Prevent Major Engine Repair or Replacement
The Most Expensive Auto Repairs That Can Total Your Car
Is My Car Totaled if the Airbag Deploys?